Digital paints

Digital Premium Wall Putty(White Cement Based)

Digital Premium Wall Putty(White Cement Based)

Digital Premium wall Putty is white cement based chemically modified wall putty specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls/ceilings ready for painting. As it is white, it can be treated as a base coat for painting. Digital Premium wall putty contains finest quality minerals, white cement and polymers/Chemicals.

Features

  • Pure White in color.
  • Provide smooth& uniform finish.
  • Odourless& anti-fungal.
  • Best Adhesiveness & durability.
  • Water Resistant.
  • Easy to apply.
  • True color tone of the paint is maintained.
  • High Coverage.

Application method / Surface preparation for Digital Premium Wall Putty(White Cement Based)

Designed for excellence, built for performance. Here's what makes our product stand out.

Benefits

-Reduces Paint consumption.
-Avoid frequent repainting.
-Cost effective.
-Protect from alkali on wall.
-Good undercoat adhesion to emulsion paints.
-Protects expensive paint from dampness, peeling off, flaking.
-Suitable for Interior Walls, Exterior Walls and Ceilings.

Safety Features

-Store the bags with the lid tightly closed in a cool, dry place.
-Keep out of reach of children and away from eatables.
-May be harmful if swallowed. In case of ingestion seek immediate medical attention.
-Wear eye protection and face mask during application. In case of contact with eyes, rinse immediately with plenty
of fresh water and seek medical advice.
-Get medical attention if irritation develops or persists.
-It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
-Do not pour leftover putty down the drain or in water courses.

How To Apply

1.Add Digital Wall Putty in water to obtain a lump free paste & mix well. (Recommended mix 40% Water)
2.Let it stand for 10 to 15 min minutes for additives to dissolve & then remix it again for 2 minutes.
3.Apply 1st coat with putty blade. (Thickness of 0.5 – 1 MM)
4.Allow the surface to dry for atleast 3-4 hours.
5.Pre wet the 1st coat need based and thsen apply 2nt coat.
6.It would be best to use emery paper of 120-150 in the first case and emery paper of 220-320 in the second case.

Other products

Join Our Newsletter

Facebook-f Twitter